Peptide Oral Dissolving Film · B2B
Custom Peptide Oral Strips OEM & ODM
Formulation, prototyping, private label, packaging and scalable production in one workflow.
Oral Film Packaging Selection Guide
Content updated · Evidence and updates
Choose film size and primary sachet together
The selection guide shows three film sizes and two primary-sachet sizes. Its low, medium and high bands are reference groupings, not validated capacities for every peptide or ingredient. The source does not define whether loading refers to ingredient mass, active-equivalent mass or total formula load. Record that basis before comparing a proposed target with a film size. No band is a human dose recommendation. The outer-carton styles are presentation options and must be checked against the actual sealed sachet, material thickness and required count.
| Film size | Source-guide loading band | Primary pack size |
|---|---|---|
| 20 × 20 mm | <10 mg | 50 × 70 mm |
| 27 × 30 mm | <50 mg | 45 × 85 mm |
| 27 × 40 mm | <150 mg | 45 × 85 mm |
Six outer packaging formats
All dimensions and counts below are supplier reference configurations, not final production tolerances or guaranteed fit. The six mockups come from the supplied catalog and do not prove moisture-barrier or child-resistant performance.
Magnetic flip box
- Reference count
- 10-20 strips
- Source dimensions
- 52 × 71 × 12 mm
Magnetic closure and a compact presentation. The outer box does not replace a qualified primary sachet.
Vertical slide box
- Reference count
- 10-20 strips
- Source dimensions
- 58 × 78 × 13 mm
Vertical sliding construction for compact shelf presentation.
Portable sleeve
- Reference count
- 3-7 strips
- Source dimensions
- 63 × 93 × 2 mm / 63 × 108 × 2 mm
Slim sleeve for samples, trade-show packs and travel-oriented presentation.
Horizontal slide box
- Reference count
- 20-30 strips
- Source dimensions
- 20 strips: 64 × 94 × 17 mm; 30 strips: 64 × 94 × 21 mm
Horizontal drawer construction with a larger presentation area.
Side-open box
- Reference count
- 10-30 strips
- Source dimensions
- 10-20 strips: 64 × 100 × 14 mm; 20-30 strips: 64 × 100 × 18 mm
Side-opening construction with access and display options.
Hanging box
- Reference count
- 20-30 strips
- Source dimensions
- 64 × 120 × 18 mm
Integrated hang tab for peg-display planning.
Shortlist by presentation need
- Compact sample presentation: magnetic flip, vertical slide or portable sleeve.
- Longer-count presentation: horizontal slide or side-open construction.
- Peg display: hanging box.
- Portable sample sets: sleeve; confirm the actual sachet stack.
These are layout choices, not comparative price or performance guarantees. Confirm the primary barrier and seal separately, then review material compatibility and packed-product stability.
Buyer questions
Do the less-than loading bands establish manufacturing limits?
No. The <10 mg, <50 mg and <150 mg bands are source-guide references. The guide does not define an assay basis or prove those loads for every ingredient. Actual feasibility requires formula-specific evidence.
Do the box dimensions guarantee the final pack fit?
No. They are supplier reference dimensions. Confirm the dieline, finished sachet dimensions, material thickness, actual strip count and prototype fit.
Is an outer box the moisture barrier?
Do not assume so. Confirm the primary sachet materials, seal performance and relevant packed-product stability separately from the outer carton.
Can I select a format before the formula is final?
A preferred style can be shortlisted, but film size, sachet dimensions, strip count and prototype fit must be confirmed before final artwork and production.
Source: Hytan Oral Film Packaging Selection Guide, page 1; Hytan Product Catalog 2026, pages 30-31. Supplier-provided reference material reviewed for this web integration on October 27, 2026. This attribution is not independent product verification.